(57 reviews) Write a Review
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

SWEAT GUARD: The sweat guard is the height of kydex against the skin


COLOR: The color of your kydex on the outside of the holster. Inside color is determined by the pattern you choose. Standard colors are .08" thick. Heavy duty is .093" thick. Our colors can be seen "HERE"

ATTACHMENT METHOD: Tuckable Overhooks are standard plastic belt attachments that go over the belt and hook underneath it. Tuckable softloops are struts that have softloops attached that secure around your belt and cannot come off without unsnapping them first. They are more secure but require more work to take on and off. 

BELT SIZE: Standard belts are 1.5" thick but be sure to measure your belt to ensure proper fitment. If your belt is under 1.5" we recommend upgrading belts. 

FINISH WASHER COLOR: Finish washers are the hardware that go between the screw and kydex. Standard is black or silver but we also offer custom powdercoated washers to accent your holster with. 

CONCEALMENT CLAW: These claws are used to push against your belt line and twist the grip of the firearm into your body. We offer multiple options so that customers who are used to one or the other can have the choice. We do not believe there to be a huge difference between one or the other from personal experience however both options do help conceal extremely well. 

CONCEALMENT WEDGE: This is one of those times that it is better to have it and not need it than to need it and not have it. It is not an option that can be added later. This helps with both comfort and concealment by pushing the top of the gun up into the body as well as having rubber against the skin rather than kydex. It is easily removable if you decide it is not something that benefits you. 

THREADED BARREL: If you have a threaded barrel on your firearm for a suppressor or comp we will leave an area for the threaded barrel. At this time our molds do not allow for comps to be installed except in rare circumstances such as ordering a Glock 34 holster for a Glock 19. We will however not guarantee that all comps will fit even in that situation as all manufacturers differ from one another. 

SUPPRESSOR HEIGHT SIGHTS: With few exceptions most of our holsters will fit suppressor height sights even without this option chosen. Our molds are built to accept up to .4" sights in most cases. If you have taller than .4" please use our contact us page to ensure they will fit. This is a very rare case that they are taller than that. 

OPTIC CUT: Our optic cut is fairly universal except for the Trijicon SRO. If you choose an optic cut but do not have an optic cut on your firearm it will not make a difference on fitment or retention.

ADD MAGAZINE CARRIER: Add a black magazine carrier to your order for $5 off our standard magazine carrier price.

ADD VIBRATITE: We recommend adding this to your order however blue loctite will also work. After adjusting your holster to your carry preferences we recommend removing all screws and applying threadlocker to them. It is not applied at our shop to allow the customer to adjust their holster when they receive it. 

LEADTIME AGREEMENT: Please be sure to review our lead times before ordering at the top of the page. At any given time we are handing 100's and sometimes 1000's of pending orders. These holsters are handmade by a small team the produces the best quality holsters found anywhere. If you are not able to wait for our level of quality we would recommend shopping elsewhere. 

ORDER CHANGES: After you place your order there are absolutely no changes or cancellations allowed. It takes far too long to track down your order in our shop to make a change that may no longer even be possible. 


57 Reviews Hide Reviews Show Reviews

  • 5

    Posted by george anderson on Apr 7th 2022

    It's simply. If it were NOT the BEST then would NOT have nine, that's right 9, custom Ares holsters! I love them PERIOD

  • 5
    Quality and comfort

    Posted by Jeff Burt on Jan 29th 2022

    I bought this holster on a whim in hopes of finding a good quality holster that was comfortable and looked good. The second day I had this I wore it appendix carry on a 6 hour road trip and didn't even know it was there. It fits great, looks great, and does what is says it will. Overall a great holster.

  • 5
    Ares IWB holster

    Posted by Nicholas Clements on Jan 25th 2022

    I was thinking this might have been a little bulky with the Wilson Combat EDC X9 but quite to the contrary. It was very comfortable. Good choice.

  • 5

    Posted by Clint on Jan 21st 2022

    Great fit and comfortable to wear. Gun stays where it is supposed to be and with the double clip, holster stays where it is supposed to be

  • 5
    Excellent holster for an unusual handgun

    Posted by Timothy Haak on Dec 21st 2021

    Ordered this for a CZ 97BD. Seems hard to find holsters and accessories for this particular weapon, but Legacy did a great job with this. Generally too heavy for an inside waistband band holster, but the quality is excellent, and craftsmanship superior.

  • 5
    Iwb holster

    Posted by Joshua Riddle on Dec 8th 2021

    Only place I could find to make a holster for my vp9l , this was definitely worth the weight this holster is by far the best quality kydex holster I've had i will be shopping here again next time I need one , will also be getting a mag carrier I would highly recommend this company Definitely worth the wait !! Thank you again !!

  • 5
    Ares holster

    Posted by Kenneth Hibbard on Nov 28th 2021

    I use the holster to ccw my Canik combat elite executive , with a holosun, micro carry comp , +3 base plate mag so 18 rnds. It actually conceals better than any holster I've used before(usually sidecar holster) my job had multiple security guards and a no firearms sign entrance, they check our bags when we come in or leave so , obviously it conceals a full size gun extremely well . Super comfortable when I found the sweet spot with my belt and body . Fit and finish seem amazing, I had a few blemishes but I got a ghost clear holster so figured that would happen, doesn't seem like a high gloss at all , witch i paid for , but oh well . Only problems I really have are at first the claw seemed very aggressive, it was pushing my red dot so far out it was obvious I was carrying something, and the holster design doesn't seem to allow removal of the claw with the hardware length . The clips are offset with one way lower in depth , so it's a pain in the ass lining up two metal clips and the claw , maybe it's not a problem with the normal clips . Retention is amazing didn't need to adjust it. My biggest problem was wait time , I've order from other holster companies (Trex, tier 1) and it came in way faster , I get its more custom but I've seen holsters being made its an hour maybe a few hours , so close to two months is insane. Get more workers or find ways to improve the process maybe ? Great holster but I'll probably never order again because i can order amazing holsters from so many companies in a much shorter time and probably at better prices, but just my two cents. If you're more patient then me and want a customer holster with a high fit and finish , great company to pick

  • 5
    Great Quality

    Posted by Levi on Nov 17th 2021

    I am happy with my purchase, firearm fits perfectly and it is comfortable. Will be buying again, though the wait time was a little long.

  • 5
    Awesome for a micro compact

    Posted by John Maesaka on Oct 2nd 2021

    For those of you who have tried to wear a micro compact IWB, you probably know what I'm talking about; for those who are thinking about getting a micro compact for the comfort and concealability- beware and read on: the short barrel length causes the gun to be grip heavy which, when carrying, causes the grip to lean away from the body because there isn't enough length of barrel/slide to keep the gun vertical. This includes the holster- they are short to fit the gun, so the top of the gun and holster cant away from the body (the grip and back of slide). This creates printing. The Legacyfirearms holsters have solved this issue with the RCS Eidolon Concealment Wedge. It really works and is the biggest difference between Legacyfirearms holsters and all the others that I've tried (my wife will tell you that I've tried way too many). In larger guns with longer barrels, the improvement is not as pronounced, but still better than without. As with all their holsters, fit and finish are top notch. Comfort is spectacular (at least for me). The stability of the holster while wearing is great which leads to confidence that the grip will always be where you expect it and at the angle you expect. Plenty of options for style of clip and ability to change cant and gun retaining tension. I haven't had it long enough to comment on durability, but many other reviewers have claimed excellent durability. I'm looking forward to finding out.

Related Products

Customers Also Viewed